1. Thicker and heavier structure because of the different backlight. There are two methods of LED backlight: direct and edge. The main advantage of edge lighting is that it can be used to make LED screens incredibly thin cause the LEDs are at the side and not behind the screen. 2.Many monitors can not support 4K.
Solution. #2. Direct is more uniform, typically. But it really depends. The X810C is a fantastic TV, if you don't need 3D and HDR. Think of the X850C as the X810C but with 3D and HDR. To clarify, it depends on the TV. Even if you get 5 of the same model #, they're all going to be different. Direct View LED. Direct View LED displays place a signal layer behind the LED array, plus a thermal plane for heat sink. The LEDs provide the lighting. OLED. With no separate light source and only half the layers of an LCD panel, OLED displays are extremely thin and lightweight. FORM FACTOR LCD. Edge-lit and backlit displays come in many Edge will not bring any punch to the colors, fald will. Forget about that contrast, the experience is really much better on the sony. Sony has blooming, that its main problem. It is amplified by the cameras used to film the videos. The Samsung q80r is much on managing blooming but has some black crush.LiquidB said: Some extra answers: 1. On reliability, the Side-LED TV's are performing worse: you need to make as much light as on a direct LED, but with fewer LED's. This means you need to use high-power LED's and drive them to the maximum. This means your average light output willl decrease over time.
Les technologies de rétroéclairage de la dalle : Full LED, Edge LED, Direct LED, QLED. Au sein de la famille des TV LED LCD, il existe plusieurs technologies de rétroéclairage: Edge Led, Full Led, Direct Led, QLED. Le type de rétro-éclairage de la dalle LCD va avoir des conséquences sur plusieurs paramètres de l’image :
Dimmer is rated 100W-400W. Dimmer Min Load: 100W / 10 = 10W. Dimmer Max Load: 400W / 10 = 40W. This means that when this dimmer is used in conjunction with LED light bulbs, the load must be between 10W – 40W. Then, add up the combined wattages of the LED light bulbs to find out how many can be supported by this dimmer.Direct-Lit LED – With this configuration, the LEDs are positioned behind the LCD panel, Below is a short video showing LG’s implementation of full-array vs edge-lit LED.
As we have mentioned before, all LCDs need an active backlight, and LED is the most popular backlight technology today. There are two types of LED backlight if we’re talking about LCD displays: edge-lit LEDs and direct-lit LEDs. Edge-lit LEDs are positioned around the edges of the screen. Displays that use this technology are more power
Μπορει να μου εξηγησει καποιος τις διαφορες αναμεσα σε direct led tv και σε edge led. Σε μια 50-55 ιντσων τηλεοραση ειναι εμφανεις οι διαφορες;Και κατω απο ποιες συνθηκες. Ευχαριστω.Soje.